Isuzu 75-155 Dyno Tuning

Isuzu NPS 75-155

Isuzu NPS 75-155 Dyno tune

The benefits of Isuzu NPS 75-155 Dyno Tuning can show longevity, reliability and huge potential for power!

These trucks are considerably underpowered from factory and we are here to change that!

Make an Enquiry

Subscribe to our blog!

Dyno Tuning Results

Dyno results NPS75-155

As you can see the Isuzu NPS 75-155 shown us 107.6HP and 286.9Nm of torque from the stock run.

After our technicians worked their magic we ended up with 181.6HP and 476.5Nm of torque! That is +70%HP and +67% Torque.

By comparison, in the past we’ve seen the NPS range surpass the +100% Gains across the board reliably and safely!

The stock ratings for the Isuzu 75-155 at the flywheel are 155HP and 419Nm of Torque. It is now heading towards the 700Nm mark at the flywheel!

Flywheel Power/Power At The Wheels

Drive line losses 75-155 Isuzu

When comparing the power/torque at the wheels to the power/torque at the flywheels we have this information to show the estimated driveline losses. This also calculates an estimate on Flywheel Power and Torque to compare to the factory figures. As you can see from this 75-155 we had some undeniably incredible gains!

Summing up, every vehicle that comes through to us here at HD Tuning receives specialised service as we believe no two vehicles are the same. We ensure to get the maximum potential out of a vehicle without sacrificing longevity or reliability.

All of our graph figures are measured in house on our dyno at the wheels. 

Get In Touch

If you think you could benefit from our Isuzu NPS Dyno Tuning get in touch with us today!

Head over to our Facebook page for updates and drop us a DM! 

HD Tuning Facebook 

HD Tuning Instagram

Head over to our YouTube to see the vehicles in action on the dyno!

HD Tuning YouTube

Custom Dyno Tuning

Send us a message for pricing and availability!

Unlocking the Full Potential of the 2022 Volvo FH16 at HD Tuning

Unlocking True Power & Efficiency: Custom Dyno Tuning a 2022 Volvo FH16 Built for Performance The Volvo FH16 comes equipped with a 16.1L engine and leaves the factory with 700HP at the flywheel, renowned for its durability and pulling power. This model is a favourite among truck owners who demand reliability and strength, especially when towing heavy loads across demanding terrains. Custom Dyno Tuning Process Using our state-of-the-art bogey drive truck dyno, we logged critical performance data and carried out multiple file revisions to safely enhance the engine’s performance. The tune focused on low-mid range torque gains, ideal for heavy transport and fuel economy improvements without compromising reliability. Stock: Establishing a Baseline The Volvo FH16 comes equipped with a 16.1L engine and leaves the factory with 700HP at the flywheel, renowned for its durability and pulling power. This model is a favourite among truck owners who demand reliability and strength, especially when towing heavy loads across demanding terrains. Stock Dyno Figures POWER: 606.9Hp at the wheels TORQUE: 2707.8Nm at the wheels These numbers are already impressive, but we knew there was room for improvement. With precise ECU remapping and dyno tuning, we aimed to boost power and torque while maintaining fuel efficiency and drivability – all crucial for long-haul operations Results from the Dyno Tune! The FH16 showed noticeable increases in torque across the rev range, smoother power delivery, and better fuel economy. All tailored to the needs of a working fleet vehicle. Post-Tuning Dyno Figures POWER: 664.1Hp at the wheels (+10%) TORQUE: 2971.1Nm at the wheels (+10%) Dyno Proven, Road Ready! Our bogey drive dyno allows us to test under real-world load conditions, giving you results you can feel… not just on paper.This FH16 now leaves the shop with gains that make a difference on long hauls, heavy loads, and fuel economy. Thinking about unlocking the full potential of your Volvo truck? Let HD Tuning take your fleet to the next level! Head over to our YouTube channel to watch some of the vehicles in action on the Dyno!  HD Tuning Youtube Channel Alternatively head over to our FaceBook page to see some of our recent work and drop us a DM! HD Tuning Facebook When considering value for money and impact, there’s no better value for money than a custom dyno tune.  PDI Performance Diesel Intercoolers PDI Isuzu NPS / NPR Truck PDI Heavy Duty Transmission Cooler $950.00 Add to cart AlienTech Powergate 3+ OBD Programmer – Isuzu N Series 45-155/75-155 $495.00 Select options AlphaTech AlphaTech Spark 3 $300.00 Select options Make an Enquiry Subscribe to our Blog! Subscribe

Read More »
Scania R620 2019 Custom Dyno tune

Unleashing Power: Custom Dyno Tune for the 2019 Scania R620

Discover how HD Tuning transformed a 2019 Scania R620 with a custom dyno tune. By optimizing its ECU settings, we boosted power by 23% and torque by 17%, delivering better acceleration, pulling power, and fuel efficiency. Check out the full details of this performance upgrade in our latest blog post!

Read More »
Isuzu 75 155 Custom Dyno Tune 4hk1

Transforming the 2019 Isuzu NPS75-155: Custom Dyno Tuning for Ultimate Performance

At HD Tuning, we recently customized a dyno tune for a 2019 Isuzu NPS 75-155, a vehicle known for its durability and strength. Our expert team optimized the engine to boost power and efficiency, enhancing both performance and fuel economy. The tune focused on improving the torque curve for smoother acceleration and better drivability. With these upgrades, the Isuzu NPS 75-155 is now ready to handle any challenge with increased horsepower and responsiveness. Stay tuned for more updates on our tuning projects at HD Tuning!

Read More »