Hyundai Santa Fe Dyno Tune

At HD Tuning, we recently had the opportunity to work on a 2006 Hyundai Santa Fe with the 2.2L D4EB engine and were able to achieve some impressive results. In this blog post, we’ll discuss the benefits of a dyno tune and share the details of our work on this vehicle.

Custom Dyno Tuning

First, let’s take a look at the vehicle and the work we carried out. To improve the vehicle’s performance, we carried out a custom dyno tune using our state-of-the-art equipment and experienced technicians.

A dyno tune involves running a vehicle on a dynamometer, which measures its power output and other key metrics. By adjusting the vehicle’s engine management software, fuel mapping, and other settings, a skilled technician can optimize the vehicle’s performance, increase its power and torque output, and also improve fuel economy.

Results from the Dyno Tune!

When we first tested the 2006 Hyundai Santa Fe on the dyno, we found that it was only producing 98Hp and 292Nm of torque. These figures were well below the factory output. This is not uncommon, as many vehicles are set up with conservative factory settings to account for a variety of driving conditions and other factors including driveline losses and current vehicle condition/health.

After carrying out our custom dyno tune on the Hyundai Santa Fe, we were able to achieve some impressive results. The power output increased from 98Hp to 122Hp, while the torque output increased from 292Nm to 335Nm. This represents a significant improvement over the stock figures and can be felt immediately on the road.

Flywheel Power/Driveline Losses

It’s important to note that the power and torque figures we’ve discussed so far are measured at the wheels. However, it’s also useful to understand the concept of flywheel power and torque. This refers to the power and torque output at the engine itself, before any losses due to the drivetrain and other factors.

Consequently, we seen a massive 24% increase in power and 15% increase in torque. Perfect for what this customer was after and they will also see improved fuel economy. Correspondingly, we can see the estimated flywheel figures after tuning is 187Hp and 505Nm from the flywheel.

One factor to keep in mind when considering power and torque figures is driveline losses. This refers to the amount of power and torque that is lost as the engine’s output is transmitted through the drivetrain and other components of the vehicle. Depending on the vehicle and other factors, driveline losses can range from 10% to 20% or more. In this case we have seen a huge 51-53% driveline loss compared to factory figures.

If you’re interested in a dyno tune, or even interested in finding out how much your vehicle is held back. Give us a call and we would be happy to assist in making your vehicle into a more practical and more enjoyable machine.

Head over to our YouTube Chanel to watch some of the vehicles in action on the Dyno!

HD Tuning Youtube Channel

Alternatively head over to our FaceBook page to see some of our recent work and drop us a DM!

HD Tuning Facebook

When considering value for money and impact, there’s no better value for money than a custom dyno tune.

Make an Enquiry

Subscribe to our Blog!

Unlocking the Full Potential of the 2022 Volvo FH16 at HD Tuning

May 6, 2025 No Comments

Unlocking True Power & Efficiency: Custom Dyno Tuning a 2022 Volvo FH16 Built for Performance The Volvo FH16 comes equipped with a 16.1L engine and leaves the factory with 700HP at the flywheel, renowned for its durability and pulling power. This model is a favourite among truck owners who demand reliability and strength, especially when towing heavy loads across demanding terrains. Custom Dyno Tuning Process Using our state-of-the-art bogey drive truck dyno, we logged critical performance data and carried out multiple file revisions to safely enhance the engine’s performance. The tune focused on low-mid range torque gains, ideal for heavy transport and fuel economy improvements without compromising reliability. Stock: Establishing a Baseline The Volvo FH16 comes equipped with a 16.1L engine and leaves the factory with 700HP at the flywheel, renowned for its durability and pulling power. This model is a favourite among truck owners who demand reliability and strength, especially when towing heavy loads across demanding terrains. Stock Dyno Figures POWER: 606.9Hp at the wheels TORQUE: 2707.8Nm at the wheels These numbers are already impressive, but we knew there was room for improvement. With precise ECU remapping and dyno tuning, we aimed to boost power and torque while maintaining fuel efficiency and drivability – all crucial for long-haul operations Results from the Dyno Tune! The FH16 showed noticeable increases in torque across the rev range, smoother power delivery, and better fuel economy. All tailored to the needs of a working fleet vehicle. Post-Tuning Dyno Figures POWER: 664.1Hp at the wheels (+10%) TORQUE: 2971.1Nm at the wheels (+10%) Dyno Proven, Road Ready! Our bogey drive dyno allows us to test under real-world load conditions, giving you results you can feel… not just on paper.This FH16 now leaves the shop with gains that make a difference on long hauls, heavy loads, and fuel economy. Thinking about unlocking the full potential of your Volvo truck? Let HD Tuning take your fleet to the next level! Head over to our YouTube channel to watch some of the vehicles in action on the Dyno! HD Tuning Youtube Channel Alternatively head over to our FaceBook page to see some of our recent work and drop us a DM! HD Tuning Facebook When considering value for money and impact, there’s no better value for money than a custom dyno tune. PDI Performance Diesel Intercoolers PDI Isuzu NPS / NPR Truck PDI Heavy Duty Transmission Cooler $950.00 Add to cart AlienTech Powergate 3+ OBD Programmer – Isuzu N Series 45-155/75-155 $495.00 Select options AlphaTech AlphaTech Spark 3 $300.00 Select options Make an Enquiry Subscribe to our Blog! Subscribe

Unleashing Power and Efficiency: Custom Dyno Tuning for a 2023 Isuzu NPS 45-155 AMT

November 15, 2024 No Comments

At HD Tuning, we’re all about maximizing performance, torque, and drivability, no matter what vehicle comes into our workshop. Recently, we had the pleasure of working on a 2023 Isuzu NPS 45-155

Unleashing Performance – 2012 Toyota Hilux Custom Dyno Tune

September 11, 2024 No Comments

Discover how we transformed a 2012 Toyota Hilux with a custom Stage 1 dyno tune, boosting power by 30% and torque by 33%, improving drivability and fuel efficiency!

Unleashing Power: Custom Dyno Tune for the 2019 Scania R620

August 22, 2024 No Comments

Discover how HD Tuning transformed a 2019 Scania R620 with a custom dyno tune. By optimizing its ECU settings, we boosted power by 23% and torque by 17%, delivering better acceleration, pulling power, and fuel efficiency. Check out the full details of this performance upgrade in our latest blog post!

Transforming the 2019 Isuzu NPS75-155: Custom Dyno Tuning for Ultimate Performance

August 8, 2024 No Comments

At HD Tuning, we recently customized a dyno tune for a 2019 Isuzu NPS 75-155, a vehicle known for its durability and strength. Our expert team optimized the engine to boost power and efficiency, enhancing both performance and fuel economy. The tune focused on improving the torque curve for smoother acceleration and better drivability. With these upgrades, the Isuzu NPS 75-155 is now ready to handle any challenge with increased horsepower and responsiveness. Stay tuned for more updates on our tuning projects at HD Tuning!

Ford Ranger Custom Dyno Tuning Thumbnail

Transforming Power: 2018 Ford Ranger PX2

June 27, 2024 No Comments

Take a look at this Custom Dyno Tune we carried out on a 2018 Ford Ranger with the P5AT engine.

The Toyota Hilux Rugged X 1GD-FTV Custom Dyno Tune Journey at HD Tuning

May 17, 2024 No Comments

Our latest project involved a 2023 Toyota Hilux that rolled into our facility with specific goals set by its owner: improved fuel efficiency, superior drivability, and an overall boost in performance.

Emissions and Dyno Testing: The Ultimate Guide by HD Tuning

May 1, 2024 No Comments

Emissions testing is not only a regulatory mandate but also a vital part of our commitment to environmental stewardship. At HD Tuning, we understand the importance of maintaining your vehicle’s efficiency and compliance with emissions standards. Our latest blog post delves into the intricacies of emissions testing under Australian regulations, outlining the testing process and its significance. We also explore how such testing can reveal crucial insights into your vehicle’s health, aiding in early detection of potential issues and ensuring optimal performance.